RME Fireface UFX+ Audio Interfaces USB & FW

Able to deftly handle up to 94 channels of I/O, the RME Fireface UFX+ is a power-packed audio interface. While the capabilities of its predecessor were legendary, the Fireface UFX+ raises the bar even higher with MADI I/O, boosted DSP, and ultra-low-latency Thunderbolt connectivity. Upgraded AD/DA converters and optimized analog I/O circuits yield unbelievably transparent results. Easily tackle critical recording situations with the Fireface UFX+'s four high-grade mic preamps, which offer a +18dBu maximum input level and 75dB of gain. Capture 76 simultaneous channels of audio directly to a thumb drive, courtesy of the Fireface UFX+'s DURec port. The RME Fireface UFX+ belongs at the center of your studio.

The RME Fireface UFX+'s comprehensive MADI connectivity creates a lot of digital and analog I/O opportunities. Expand your analog channel count to accommodate your mixing console. Route/mix within the digital domain through numerous sources. You can also connect multiple external MADI devices in series. Beyond that, the MADI I/O is still available via RME's integrated hardware mixer - even when the Fireface UFX+ is in USB 2.

0 mode - which is limited to 30 channels I/O (12 analog, 16 ADAT, and 2 AES). Configure the Fireface UFX+ to clock externally from MADI. Utilize both MADI I/Os simultaneously with 32 channels each on optical and coaxial, by virtue of the Fireface UFX+'s split mode. The number of options available is mind boggling!

Conveniently located on the front of the RME Fireface UFX+ is a DURec port. This port enables direct USB recording to an external thumb drive

The Fireface UFX+ provides you with incredible control over inputs, outputs, mix levels, and more, thanks to RME's TotalMix FX software mixer.

RME's ARC USB remote (sold separately) connects to your computer via USB, and provides you with direct control over the Fireface UFX+. The ARC USB fits conveniently on your desktop and has 15 freely assignable and illuminated buttons, one encoder wheel, and a footswitch jack. ARC USB is completely plug and play. As soon as you connect it, TotalMix FX will detect it.