German, super, Om 10
There is no power button, and a few words in the review
A good player for a beginner or for a vinyl not very frozen ... A voluminous collection of records was inherited, the choice fell on the Pro-jet A1 (OM 10), there are codes on the box, which is easy to understand where the bottom is up, the packaging is excellent, Even if you carry from the store like a suitcase, nothing will happen to it ... The most excellent inter -block wire, just respect for the full program !!!!
But :-) You launched a plate and at this time in a non-feeled way you close the transparent lid, then most likely you will hear such a not strong boom in the columns ... If the needle on the zero track crawls to the first track, and you put on the cabinet on which there is a player of the one The same brush from dust ... You will hear not a strong boom in the columns .... I’ll try to additionally put some demos under the legs ... Understand correctly, it’s not critical, just know that this is the initial level that is definitely worth your money. . By sound, I dug up in the collection as young we were Gradsky .... fucking, the feeling of presence was to goosebumps ... I did not regret the captivity, a wonderful unit with a magic of a machine gun, a good sound (if you do not drum on the cabinet on which He stands) I definitely recommend buying (not for dancing of course) to enjoy the sound ...
Translated from pult.ru
Original reviews
Full machine, convenient. It will be optimal with a built -in corrector
The head of Om 10 disappointed a little. When turning off, the sound from the head does not turn off when the needle is cleaned to be prepared. I could not adjust the legs.
A good player, from the category for the lazy. Put, turned on and listen. I think to replace OM10 with Pick-SIT 25A. For money, it is fully consistent. Mechanics only work when moving tonarm, it does not interfere with the final listening.
Translated from pult.ru
Original reviews
Heavy, even sound, resistant to vibrations, a quiet mechanism
Someone may not be suitable for a steamed RCA cable
I took an Audio-Technica at-vp60xusb. Compared to this PRO-JECT player, 2-3 times more weighty, it looks more solid. Compared the sound, the Pro-JECT signal level is about 3 dB below, although in terms of characteristics I expected a small increase on the contrary. Not critical.
The sound compared to audio equipment is softer, even, the bass is not so bulging. In general, without comparing the forehead in the forehead, the sound is very similar. For me, the most important advantage was the stability of the player to fluctuations, the floor in the apartment is poorly laid and the parquet swims, and with it the dolling cabinet. Audio equipment was stuck, went on tiptoe. This player does not care, at least jump. The playing speed is flat, corresponds to studio records. I am very pleased with the purchase, for this money perhaps the best machine gun.
Translated from pult.ru
Original reviews
fully machine, made in Germany
Box as a pasta, there is no indication top of the bottom, instruction sheet. There is no opportunity to regulate the catporting, the needle in terms of pressing and anitsky -intelligence of the auditing agent offers this. Kga
I took according to the reviews (according to YouTube, etc.) a machine for Jack, it's cool.
The box is unhappy that the box is just a cardboard, and it is not indicated where the bottom or top and when unpacking of course the top turned out to be below. (Funny) During the transportation, what was hanging there (it was good that a piece of foam turned out to be)
It plays well, but not super, the same audio technician sounds brighter (within the price) although, of course, there are almost no sounds of switching in mechanics.
In the general apparatus, I am satisfied, especially at the cost, the machine is super, you don’t need to run after the plate, etc.
Translated from pult.ru
Original reviews
An excellent automatic player vinyl for reasonable money.
No
Little player vinyl Pro-ject A1 (OM 10) Black
The best choice for the first Hi-Fi player vinyl.
Pro-ject A1 is a player with fully automatic control.
To start listening to the plate, it is enough to press only one button.
The tonarm of the player will automatically lower the needle at the beginning of the first composition on the disk.
At the end of listening, the tonarm will rise and return to its original position.
Pro-jECT A1 is made on a chassis from MDF and equipped with an aluminum support disk.
A phono -corrector is installed in the player. The Pro-JECT A1 is equipped with an ORTOFON OM 10 with a booster and completely set up at the factory.
A fully automatic player
The player vinyl Pro-ject A1 is equipped with automatic control.
To start playing the plate, you just need to press the button.
Tonarm will bring the needle by the beginning of the first composition on the record and carefully lower the needle on the path.
As soon as the last chords of the final composition respond, the tonarm will automatically rise and return to its original position.
Reliable design
The Pro-Ject A1 is made on a massive chassis from MDF and installed on damping supports to minimize vibrations.
An aluminum support disk is equipped with an inner ring, which is designed to extinguish resonances.
The engine is connected to an electronic circuit that provides its stable operation.
Electronic speed switch
To change the speed of rotation of the plate (33.1/3 or 45 rpm) on the Pro-Ject A1 player, it is enough to press the button.
Aluminum tonarm and sound composer
The Pro-Ject A1 player is equipped with a light aluminum tonarm with a length of 8.6 inches.
A pickup holder is installed on the tonarm, designed specifically for this model.
The holder is made of composite material based on carbon. On the player, the MM-cartridge Ortofon OM 10 is installed.
Completely ready to work
The player is completely set up at the factory, so its initial installation takes a minimum of time.
The Pro-JECT A1 is equipped with a built-in phonor-corrector for the possibility of connecting to any linear input of the amplifier.
As well as a branded non-removable Phono Cabel Connect It E.
Made in Germany
The Pro-Ject A1 player is made at the company's factory in Germany.
Translated from pult.ru
Original reviews
Pro-Ject was founded in 1991, during the onslaught of the compact disc and CD players, with the mission to offer the best analogue experience for reasonable prices. In a time where the digital audio media had been on the rise, and vinyl was declared as outdated and dead, Heinz Lichtenegger kept his belief in the simple but best way to enjoy music – turntables.
Find out more about Pro-Ject